Click to enlarge
FlexMAX self-steering trailer
FlexMAX self-steering trailer
Back to products
MAX100 semi-trailer
MAX100 semi-trailer

MultiMAX low loader

  • 2 to 10-axle low loader, extendable up to 36 metres

The MultiMAX is an economic and flexible solution for a multitude of different transport tasks – a genuine all-rounder!

Due to a whole series of specific options, the ideal vehicle combination can be found for every application area: from construction and heavy-duty transport, crane projects through to energy, agriculture and forestry.

  • Particularly versatile and extensive
  • 2 to 10 axles
  • Payloads up to 120 tonnes possible
  • Extendable up to 36 meters
send request
SKU: MultiMAX Category:
Description

Description - MultiMAX low loader

Cost-effectiveness, adaptability and speed are factors that put a company on the road to success. Semi low loaders from Faymonville provide the foundations for you to precisely meet these requirements.

The goosenecks

Design, fifth wheel load, turning radius - all this is determined according to the tractor unit used, and the everyday projects for which the vehicle is expected to be employed.

  • Outer beam neck – AT
  • Hydraulic outer beam neck – W-AT

The loading platform

There is a choice between non-telescopically extendable and up to 3 times telescopically extendable versions.The most extensive range of ramps of any low loader manufacturer is also available. 

  • The excavator trough
  • The extendable loading platform
  • The rear section
  • The outriggers
  • The wheell recesses
  • The lowered loading platform
  • The loading platform coverings
  • The reinforced "Heavy Duty"-version
  • The hydraulically widenable loading platform
  • The hydraulic lifting platform
  • The railway vehicle
  • The tarpaulin structure

The bogie

A whole series of different axle types are available in the Faymonville semi low loader range. Their selection depends on the vehicle’s expected field of application, the cost/benefit calculation as well as the desired payload capacities.

  • Knuckle steering and air suspension
  • Knuckle steering with hydraulic suspension
  • Twin Axle II independent wheel suspension
  • Knuckle steering with cranked axles

The steering

Steered axles are generally installed on all vehicle variants in the MultiMAX family. 

  • The friction-steered axles
  • The hydraulic force steered axles

The ramps

Areas of activity

Applications

The Faymonville MultiMAX low loader trailer is a particularly versatile and extensive low loader system and is suitable for the transport of:
  • Construction machinery such as excavators, dumpers, etc.
  • Forestry machines such as harvester, skidder, forwarder,...
  • Farming machines: tractors, combine harvesters,...
  • Wind power plants composed by tower segments, generators, rotor or turbine blades
  • Steel and concrete elements
  • Industrial parts such as transformers, crane-loaded goods,...
  • Lifting platforms or fork-lift trucks
  • Cranes, crane weights, crane components
  • Conveying and crushing systems for the demolition and recycling industry
  • Track-guided vehicles such as trams, locomotives, wagons
  • Bulky goods, long materials and heavy loads

If you have any questions contact us:​

logo-dark

We'll help you find the ideal trailer solution tailored just for you!

The Yur Track Sp.Z O.O. stands out as a top provider of diverse vehicles catering to heavy load and special transport needs.

Contact details

We work in Poland and all over Europe

For driving onto the loading platform of the vehicle, the Faymonville semi-trailer range offers hydraulically operated single and double ramps with different load bearing capacities, several coverings and various widths. 

  • The single ramps
  • The double ramps
MultiMAX-28
MultiMAX-57
MultiMAX-78
MultiMAX-72
MultiMAX-73
MultiMAX-5
MultiMAX-1
MultiMAX-35
MultiMAX-32
MultiMAX-2
MultiMAX-70
Additional information
Trailer type

Lowbed trailer
Area of use

Agriculture, Construction, Forestry & wood, Breakdown service & service workshop, Cranes & equipment, Finished parts, Heavy & industrial transport, Lifting equipment

Related products

Quick view

MAX410 ballast trailer

  • 3-5 axles
  • Pneumatic suspension
  • 22.5“ tires
Need to transport crane elements? Have a look at the MAX410 ballast trailer for the transportation of compact crane components and counterweights. To grant you optimal maneuverability, the MAX410 works with an hydro-mechanical steering system. When securing the load, you can count on numerous lashing points. A compact MAX410 version with three axles can be used for the transportation of your crane components and weights within cities or narrow areas. The MAX410 series is equipped with pneumatic suspension, a standard width of 2,540 mm and a fifth wheel height in loaded position between 1,280 and 1,400 millimeters.
Quick view

ModulMAX modular trailers

ModulMAX is a series of combinable transport modules with 2-6 axle lines for off-road and on-road operations. The modular vehicles are equipped with 215/75 R17.5¨ twin tyres and are available in a basic width of 3,000 mm. The ModulMAX range includes technical characteristics that are put to multi-disciplinary use for G-Modul and S-Modul. The transport operator benefits from this freedom of choice to select the modular type that suits the best with its requirements. The proven pendle-axle technology is used within the three available trailer modes: Trailer Mode, Assist-Propelled Mode and Self-Propelled Mode. The steering system of these trailers varies between the electronic and the mechanical principle. The ModulMAX modular trailer range is rounded off by a full range of options and accessories to obtain the best configuration for any type of load.
Quick view

CombiMAX modular vehicle system

The CombiMAX is a unique, far-reaching modular vehicle concept, the idea of which is based on the variety of combinations with standardised components. The principles of modularity and flexibility are applied to the trailers for medium to heavy payloads of between 50 and 250 tonnes.
Quick view

VarioMAX lowbed trailer

The VarioMAX lowbed trailer has a removable 1-4 pendle-axle bogie between the gooseneck and the lowbed. Thanks to its robust and well thought-out design, this low-bed solution represents the ideal ratio between payload and dead weight for heavy tonnage classes.
  • High payload possibilities
  • Removable bogie: Compact design for empty runs
  • High manoeuvrability
  • Wide variety of vehicle designs
Quick view

MAX200 flatbed trailer

  • 3-4 axles
  • Pneumatic suspension
  • 17,5", 19.5“ and 22.5“ tires
Whether you are hauling long steel elements, concrete precast beams or long industrial goods, MAX200 flatbed trailers make your mission easier. With the MAX200, you can extend the length of the loading platform from the basic size of 13,600 mm to max. 29,800 mm into the double extendable version. The flatbeds have a low tare weight and they are robust and easy to maintain. You can also choose this vehicle with hydraulic power steering system. This feature makes your flatbed extremely maneuverable and helps you master tight corners or convoluted entrances effortlessly. Have freights with a large volume? With a low loading height of 990 mm the MAX200 can support you in the process. All models have air suspension and a standard width of 2,540 mm.
Quick view

MAX300 drawbar trailer

  • 2-3 central axles
  • Pneumatic suspension
  • 17,5" tires
With its compact design, the MAX300 drawbar trailer is suitable for the transportation of smaller and medium sized plant machinery. Our central-axle trailer in tandem or tridem design offers you comfortable manoeuverability on winding and narrow construction sites. It is a trailer type that is easy to reverse. The lightweight construction allows you to load more on your MAX300. Due to the low loading floor, challenges with higher loads are resolved successfully. The hydraulically controlled ramps enable an easy and safe loading process. Many lashing points stand for maximum security. The MAX300 series has air suspension and a standard width of 2,540 mm for it's 3-axle version. The tandem trailer is only 2,480 mm wide.
Quick view

FlexMAX self-steering trailer

The FlexMAX is a self-steering trailer with 2 - 5 axles for the transport of self-supporting long material. It is provided with an adjustable steering system that autonomously follows the tractor. he trailers for medium to heavy payloads of between 50 and 250 tonnes.
Quick view

GigaMAX low bed semi-trailer

The GigaMAX low bed semi-trailer is characterised by one or two pendle-axle dolly that is permanently attached to the gooseneck. This allows for an extremely compact overall towing length with a long loading area at the same time. The integrated pendle-axles increase the payload at the front of the vehicle.
  • Low dead weight
  • Compact design
  • High agility
  • Ideal manoeuvrability